When it comes to choosing a chainsaw the first thing that you should look at is how strong your legs are. The problem is that many people think of these machines as being able to cut through anything. They can, but they are not designed for doing this sort of damage easily.
If you have weak legs then you will want to choose a model that uses extension bars. Chainsaws have two different methods of cutting. The most traditional way is to have the saw blade push the piece of wood slant away from you at a 45-degree angle.
As the chain spins around this is how much of the material it will cut off. This means that even though you can get a lot of material removed from your board it is possible to over-perform. By selecting a chainsaw with fewer teeth the board can be cut more efficiently. There are powerful chainsaws that you can get at an affordable rate as mentioned on sawszone.com.
Another consideration is whether or not to get a double or triple bar. The difference between a double bar and a triple bar is that there are two sets of teeth. A double bar has three sets of teeth, whereas a triple bar has four sets of teeth. It is because of this design that this type of chainsaw is generally more expensive than a standard one.
The next feature that you will want to pay close attention to is chain tensioning. There are two types of chain tensioning available; front-only and read-only. Although chainsaw suppliers claim that rear-only tensioning is more efficient, it does take longer to engage the chain than front-only tensioning.
In terms of dollars spent per hour, chainsaw use is actually more efficient with rear-only tensioning. This means that if a chainsaw user wishes cut quickly they should opt for a chainsaw with this feature. The last feature to consider is the kickback. Kickbacks occur when a chainsaw operator accidentally releases the chain while making a cutting stroke.
When chainsaw kickbacks occur, it can cause the chainsaw to hit a surface and cause serious injury if not caught immediately. For this reason, it is recommended that chainsaw users familiarize themselves with how far back the blade should be released from before releasing the saw so that they will be able to minimize the chances of being kicked back.
A chainsaw should also have a guide bar. The guide bar helps the chainsaw operator to keep both hands on the saw at all times. Ideally, the guide bar should be placed near the front of the saw, as this will make it easier to see the blade and limbs.
However, if your chainsaw does not currently have a guide bar, it is suggested that you purchase one since having one can greatly help a chainsaw user when making quick cuts. Finally, if you are purchasing a new chainsaw it is important that you examine it to determine whether or not it uses a chain tensioning system.
Both manual and electric models use tensioning systems in order to prevent the chain from slipping when cutting firewood or clearing brush from the firewood pile. Depending on your intended usage of your chainsaw will determine which chain tensioning system best fits your needs.
Chainsaws run on gasoline or nitrous oxide and sometimes nitrogen. In order to determine which fuel source to use on your saw, it is recommended that you consult an owner’s manual.
While there are some advantages to using either gas or nitrogen-based fuels in your chainsaw; others are not as beneficial such as lower starting prices, lower starting fuel consumption, and lesser exhaust emissions. Nitrogen is often considered to be a better option for beginners due to its lower price tag but it can pose dangers to anyone who is allergic to nickel.
